Start working with the 2P Slim Mouse
1. Hold the slim mouse with its back side facing you.
2. Pull out the Mouse Module (and create a gap between the
Mouse Module and the Grip Handle).
3. Gently pull the USB cable (that stretches out between the
Mouse Module and the Grip Handle) so that the round USB
Cable Storage spins and the whole USB cable is gradually
released from under it (through the Cable Guide Groove).
4. When the whole USB cable is released gently lift the USB plug
from its nook with your finger or fingernail.
5. Turn the Mouse Module around so that the buttons face
upwards and the USB cable turns from the mouse outwards.
6. Twist the Grip Handle around the Rotational Hinge.
7. Place the arched mouse on a flat surface and lean your hand
on it so your fingers lay on the right and left buttons.
8. Adjust the length of the mouse so it fits your hand size
comfortably: slide the Mouse Module towards the Grip Handle
to make the mouse shorter or slide it outwards to make the
mouse longer.
9. Connect the USB cable to the USB slot in your computer.
10. You are set to start working with the slim mouse.
"Wrap up" the 2P Slim Mouse
1. Twist the Grip Handle around so the mouse is flattened and
the USB retractor faces upwards.
2. Twist the Mouse Module around so the Optical Module faces
upwards and the USB cable is turned towards the Grip
Handle.
3. Place the USB plug inside its nook and gently lay the USB
cable inside the Cable Guide Groove.
4. Cover the USB cable laying inside the Cable Guide Groove
with one of you thumps (to keep it down) and with your other
hand turn the round USB Cable Storage plate by
the direction of the arrow.
5. Gradually retract the cable until it is all hidden neatly under
the round plate. Tighten in the Mouse Module and retract the
remaining cable so the mouse returns to be a flat and tight
unit.

€33.99 / $49.99
Buy now!
Warnings:
1. Do not drop the mouse or shock it in any other way.
2. Do not look directly at the lighting LED in the Optical Module.
3. The mouse will not work on glass (or any other reflecting
surface), dust or a wrinkled surface.
4. Do not twist the Grip Handle before the USB cable is released
(it might tare).
5. Do not pull the USB Cable when removing the USB Plug from
the nook (in the mouse) or from the computer's USB slot.
6. The slim 2P mouse generates a magnetic field: Do not place
it near credit cards or other equipment that can be damaged
by this magnetic field.
7. Keep away from water and heat.
(Back to HomePage)